Assessment of Effectiveness of Health and Safety Systems in Construction Industry: A Case Study Lee Construction Ltd

Authors

  • Josephine Wanjiku Open University of Tanzania
  • Jeseph Magali Lecturer

Keywords:

health procedures, workers perception, factors

Abstract

Purpose: The general objective of the study was to assess the effectiveness of health and safety systems in construction industry and more specifically in Lee construction Ltd.

Methodology: The study utilized qualitative, descriptive and quantitative research methodology to assess how employees of Lee construction Ltd experience the effectiveness of health and safety systems in their organization. The population of the study was 150 permanent and 200 casual employees of Lee Construction Ltd.  The final sample size was 100 employees. In which case 40 were permanent and 60 were casual employees. This study used primary data which was collected through use of a questionnaire. SPSS was used to produce frequencies, descriptive and inferential statistics which was used to derive conclusions and generalizations regarding the study.

Results: The study found out that knowledge has a positive influence on health outcome though not significant while management prioritization, attitude and practice have a positive and significant influence on health outcome.

Unique contribution to theory, practice and policy: The study recommend that attention to the detail of regulatory frameworks may be necessary to ensure they meet the requirements of ILO Convention and properly support the activities of health and safety representatives.

Downloads

Download data is not yet available.

Author Biographies

Josephine Wanjiku, Open University of Tanzania

Post graduate student

Jeseph Magali, Lecturer

Open University of Tanzania

References

Amirah, N. A., Asma, W. I., Muda, M. S., & Amin, W. A. A. W. M. (2013). Safety Culture in Combating Occupational Safety and Health Problems in the Malaysian Manufacturing Sectors. Asian Social Science, 9(3), p182.

Anumba, C., and Bishop, G. (1997). "Importance of safety considerations in site layout and organization". Canadian Journal of Civil Engineering, Vol. 24, No. 2, pp. 229-236.

Cronbach, L. J. (1995). Coefficient alpha and the internal structure of tests. Psychometrika, Vol. 22(3), pp. 297-334.

Gibb, A., and Bust, P. (2006). Construction Health and Safety in DevelopingCountries, European Construction Institute, Great Britain, 77pp, ISBN 1873844 63 8.

Health and Safety Executive (2009a), Health and Safety Induction for Smaller Construction

Companies 2nd Ed., Crown Copyright, UK

Heinrich, H.W., Petersen, D., and Roos, N.,(1980). Industrial Accident Prevention,

McGraw-Hill, 468 p

Im H. J., Kwon Y. J., Kim S. G., Kim Y. K., Ju Y. S.,and Lee H. P. ( 2009). The characteristics of fatal occupational injuries in Korea's construction industry,1997-2004. Safety Science, v47, n8, pp1159-1162.

International Labour Organisation. (1992). Safety and health in construction. An ILO Code of Practice. Geneva.

Kheni, N. A., Dainty, A. R., & Gibb, A. (2008). Health and safety management in developing countries: a study of construction SMEs in Ghana. Construction Management and Economics, 26(11), 1159-1169.

Koehn, E., Ahmed, S. A., and Jayanti, S. (2000) Variation in construction productivity: developing countries. AACE International Transactions, Morgantown, pg. 14A, 7 pgs. Koehn, E., Kothari, R. K., and Pan, C.-S. (1995). Safety in developing countries: Professional and bureaucratic problems. Journal of ConstructionEngineering and Management, 121(3), 261-265

Koehn, E., Ahmed, S. A., and Jayanti, S. (2000). Variation in construction productivity: developing countries. AACE International Transactions, Morgantown, pg. 14A, 7 pgs.

Koehn, E., Kothari, R. K., and Pan, C.-S. (1995). Safety in developing countries: Professional and bureaucratic problems. Journal of ConstructionEngineering and Management, 121(3), 261-265.

Mwombeki F.K. (2005). Rethinking and Revitalizing Construction Safety, Health, Environment

and Quality, 4th Triennial International Conference, Port Elizabeth, South Africa 17-20 May.

Shappel, S.A.,and Wiegmann, D.A., (2000). "The Human Factors Analysis a Classification System-HFACS," Final Report DOT/FAA/AM-00/7', US Department of Transportation, Federal Aviation Administration, 32 p

Tam, C.M., Zeng, S.X., Deng, Z.M., (2004). Identifying elements of poor construction safety management in China. Safety Science 42 (7), 569-586.

Teo, E. A. L., & Ling, F. Y. Y. (2006). Developing a model to measure the effectiveness of safety management systems of construction sites. Building and Environment, 41(11), 1584-1592.

Watfa N., (2009). The National Occupational Safety and Health Profile of The Sultanate Of Oman, Ministry Of Man power in Collaboration with the International Labor Organization

Wilson Jr., J.M., and Koehn, E. (2000). "Safety management: problems encountered and recommended solutions". Journal of Construction Engineering and Management, ASCE, Vol. 126, No. 1, pp. 77-79.

Zeng, S. X., Tam, V. W., & Tam, C. M. (2004). Towards occupational

health and safety systems in the construction industry of China. Safety science, 46(8), 1155-1168.

Zeng, S. X., Tam, V. W., & Tam, C. M. (2008). Towards occupational health and safety systems in the construction industry of China. Safety science, 46(8), 1155-1168.

Downloads

Published

2016-07-29

How to Cite

Wanjiku, J., & Magali, J. (2016). Assessment of Effectiveness of Health and Safety Systems in Construction Industry: A Case Study Lee Construction Ltd. Global Journal of Health Sciences, 1(1), 1–15. Retrieved from https://iprjb.org/journals/index.php/GJHS/article/view/40

Issue

Section

Articles