INFLUENCE OF PATTERN DRAFTING AND FREE-HAND CUTTING TECHNIQUE ON APPAREL FIT AMONG FASHION DESIGNERS IN KOFORINDUA, GHANA

Authors

  • Dymphna Bakker-Edoh Kenyatta University
  • Prof. Keren G. Mburugu Kenyatta University
  • Dr. Bosibori Oigo Kenyatta University

Keywords:

Pattern Drafting, free-hand cutting, apparel fit

Abstract

Purpose: To assess the influence of pattern drafting and free-hand cutting technique on apparel fit among fashion designers in Koforindua, Ghana.

Methodology: The study employed a cross-sectional descriptive survey was considered adequate for this study as it has the advantage of soliciting respondent's views on the nature of the situation as it existed at the time of a study (Creswell, 2012; Mugenda, 2008). The design is an efficient way of collecting information of a large group of people within a short time using questionnaires. The survey design was deemed appropriate for this study as it has the advantage of seeking the views of informal dressmakers and tailors on the use of pattern drafting and free-hand cutting in apparel construction. It allowed for the use of both quantitative and qualitative techniques in the study. This paved way for better understanding of a phenomenon under study. The use of these methods offered the opportunity to have in-depth information and also the weakness in one method is compensated for by the strength in another method (Creswell, 2012).

Results: Pattern drafting was scored higher than free-hand cutting. Concerning how measurements were being taken, it was realized that there was great disparity between the two groups in the way measurements were taken and recorded. The group using pattern drafting scored good (75%), the group using the free-hand cutting had a low score of 34%. In other words, they showed low skills in taking measurement in all the apparel they sewed. The implication is that measurement taking was a great problem that needed to be addressed as far the use of free-hand cutting method is concerned. Proper taking and recording of measurement for future references was not part of their style. Standing position of clients during measurement taking was not given the needed concern.

Unique Contribution to theory, practice and policy: The study recommended more vocational training on pattern drafting to increase the accuracy in dress crafting. Additionally, the study advocated for IDTA to enact policy to incorporate pattern drafting and other methods of apparel construction into the training curriculum of apprentices to develop interest in the use of these methods right from the onset.

Keywords: Pattern Drafting, free-hand cutting, apparel fit

Downloads

Download data is not yet available.

Author Biographies

Dymphna Bakker-Edoh, Kenyatta University

Post Graduate Student

Prof. Keren G. Mburugu, Kenyatta University

Lecturer

Dr. Bosibori Oigo, Kenyatta University

Lecturer

References

Ampong, V.O. (2011). Ghana's textile/garment industry. Industrial Development and Investment Division, Ministry of Trade and Industry, Ghana.
Anikweze, G. U. (2013). Figure types and the challenges of making apparel in Nigeria. PAT 2013, 9(1), 135-146.
Boakye, K. (2010). Challenges facing the small-scale textile and apparel industry in Ghana. Unpublished MSc Thesis. KNUST: Kumasi, Ghana.
Creswell, J. W. (2009). Designing and conducting mixed methods research. Thousand Oak, CA: Sage Publication
Dove, T. (2016). Stretch to fit-made to fit. International Journal of Fashion Design, Technology and Education, 9(2), 115-129.
Efajemue, O. O., & Lily, G. (2011). Analysis of adult female clothing made with adapted patterns and free-hand cutting: constrains and prospects. Proceedings of the First International Technology, Education and Environmental Conference, September 08, Omoku, Nigeria.
Foster, P., & Adamtey, S. (2009). A manual for free-hand cutting of apparel. Accra: Asante and Hittscher Printing Press.
Foster, P., & Ampong, I. (2012). Pattern cutting skills in small apparel industries and teacher education universities in Ghana. International Journal of Vocational and Technical Education, 4(2), 14-24.
Joseph-Armstrong, H. (2010). Pattern making for fashion design. New Jersey: Pearson Education Inc.
MacDonald, K. F. (2010). Education and training for the informal sector. DFID Education Paper No. 11. London: DFID.
MacDonald, N. M. (2010). Principles of flat-pattern design (4th ed.). New York: Fairchild Books.
Mugenda, G.A. (2008). Social science research: Theory and principles. Nairobi, Kenya: Applied Research and Training Services.
Shailong, C.N., & Igbo, C.A. (2009). Establishment of average body measurement and drafting of basic block patterns for male preschool children in Enugu State. Journal of Home Economics Research, 13(19), 331-332.
Thomas, P. W. (2009). Pattern drafting hand drafting: A skirt block page 2 measuring. Retrieved from http://www.fashion-era.com

Downloads

Published

2018-10-15

How to Cite

Bakker-Edoh, D., Mburugu, P. K. G., & Oigo, D. B. (2018). INFLUENCE OF PATTERN DRAFTING AND FREE-HAND CUTTING TECHNIQUE ON APPAREL FIT AMONG FASHION DESIGNERS IN KOFORINDUA, GHANA. International Journal of Strategic Marketing Practice, 1(1), 1–7. Retrieved from https://iprjb.org/journals/index.php/IJSMP/article/view/739

Issue

Section

Articles